Pionox Carbon Monoxide (CO) Monitors

A carbon monoxide monitor is strongly recommended by OSHA and CSA for all breathing air applications.

The Pionox Carbon Monoxide (CO) Monitor is designed to meet the OSHA and CSA standards for the detection of carbon monoxide in compressed air systems. The Pionox CO Monitor continuously monitors the compressed air line for CO concentration and activates an audible and visible alarm should the contaminant level rise above the preset alarm point.

Pionox Auto-Cal CO Monitor Specifications

Standard Features and Benefits

1. Highly reliable electro-chemical sensor - the most advanced sensor available for the detection of carbon monoxide. Accuracy to within ±1% with quick response time. Sensor is capable of detecting carbon monoxide levels as low as 1 PPM.
2. Digital readout - easy to read digital readout designed to accurately display carbon monoxide levels in PPM.
3. Audible and visible alarm - audible alarm rated at 100 dB @ 1 foot and visual warning light to alert user that carbon monoxide concentration has reached an unacceptable level.
4. Adjustable alarm set point - alarm set point is fully field adjustable from 5 PPM to 50 PPM (factory set at 10 PPM unless specified).
5. Air flow indicator - allows simple and accurate measurement of air flow across sensor.
6. Alarm mute switch - allows muting of horn once the alarm has sounded.
7. NEMA 12 electrical.

Ç(back to top)

Available Options

1.  NEMA 4
2. Remote digital readout and alarm
3. Highly visible strobe warning light
4. 1.0 CUFT or 3.6 CUFT calibration kit
5. 1.0 CUFT or 3.6 CUFT calibration gas
6. NiCad battery with charger
7. Cooling option for high temperature areas

Ç(back to top)

Carbon Monoxide Monitors Specifications

• CM = Pionox CO Monitor
• CMA = Pionox with Auto-Cal without case
• CMAC = Pionox with Auto-Cal in carrying case

Ç(back to top)

Pionox Auto-Cal CO Monitor Specifications

The CO Monitor shall include highly accurate (±1%) and reliable electro-chemical sensor capable of detecting CO down to 1 PPM. The monitor shall have digital read out, audible and visible alarm, air flow indicator, alarm mute switch and NEMA 12 enclosure. The alarm set point shall be factory set at 10 PPM and field adjustable from 5 PPM to 50 PPM.

The monitor shall have Auto-Calibration feature. It shall include prepiped calibration gas. Calibration shall be as simple as opening the gas valve, switching Auto-Cal ON and adjusting the setting. The monitor shall be Pionox o CMA series o CMAC series (with rugged carrying case). 

Ç(back to top)

NEW! Auto Cal  - Calibration made real simple......

1. Open the valve.
2. Turn on Auto-Cal.
3. Adjust setting ( if necessary )

Auto-Cal Carbon Monoxide Monitor

For proper operation, it is recommended that your Pionox CO monitor be calibrated every four to six weeks. In addition to saving time, Auto-Cal is more economical, because it uses less calibrating gas than manual calibration. A canister of calibration gas is included with Auto-Cal.

The Pionox and Auto-Cal CO Monitors are available either pre-wired and mounted on your Pioneer continuous duty purifier or as a stand-alone unit in an easy to carry case.

Auto-Cal has the following standard features and benefits:

1. Highly reliable electro-chemical sensor - the most advanced sensor available for the detection of carbon monoxide. Accuracy to within ±1% with quick response time. Sensor is capable of detecting carbon monoxide levels as low as 1 PPM.
2. Digital readout - easy to read digital readout designed to accurately display carbon monoxide levels in PPM.
3. Audible and visible alarm - audible alarm rated at 100 dB @ 1 foot and visual warning light to alert user that carbon monoxide concentration has reached an unacceptable level.
4. Adjustable alarm set point - alarm set point is fully field adjustable from 5 PPM to 50 PPM (factory set at 10 PPM unless specified).
5. Air flow indicator - allows simple and accurate measurement of air flow across sensor.
6. Alarm mute switch - allows muting of horn once the alarm has sounded.
7. NEMA 12 electrical.
8. Simple three-step calibration- easy calibration takes less time and less calibration gas.
9. Calibration gas - includes a 1.0 CUFT bottle of calibration gas.
10. Portable carrying case - stand-alone units are securely mounted in a carrying case with readily accessible connections. Case can also be wall mounted.

Available Options

1.  NEMA 4
2. Remote digital readout and alarm
3. Highly visible strobe warning light
4. 1.0 CUFT or 3.6 CUFT calibration gas

Auto-Cal CO Monitors can be ordered as a stand-alone unit in a rugged carrying case, or it is available as an add-on to your breathing air purification system (below). Pioneer will even install it on your system at no charge when you purchase Auto-Cal with a Pionox continuous duty purifier.

 Ç(back to top)