HomeAbout UsProductsBrochuresManualsContact UsMSDSTestimonys

Particulate, Coalescer, and Micro-Coalescer Filters

Benefits

  1. Filter Change Monitor -An easy to read delta gauge of engineered plastic is standard in 3/4" (19.05mm) NPT and larger filters. It is optional in smaller sizes and in stainless steel filters.
  2. Sealed End Caps on each end of the filter element prevent leakage.
  3. Lower Pressure Drops -Elements are longer, amply sized and designed for minimum pressure drop.
  4. Larger Contaminant Holding Capacity -The pleated design of the particulate filters gives 10-20 times the filter area of a coalescer. Coalescers have increased depth for maximum coalescing and holding capacity. Particulate filters can increase the useful life of a coalescer by up to six times.
  5. High Integrity -Designed to withstand up to 50 PSIG/3.45 BAR G differential pressure.
  6. Longer Life -Large dirt-holding capacity and high rupture resistance provide increased element life.
  7. A.S.M.E. Construction -Filter vessels PS2600D, CS1650D, MS1250D and up are A.S.M.E. certified.
  8. Greater Compatibility -Suitable for air and most gases. Elements with temperature ratings up to 450 °F/232 °C are available (225 °F/107 °C standard).
  9. Back-Saver Feature -PS2600D, CS1650D, MS1250D and up.
  10. Built-in Particulate Filter -Coalescer CS1650D, Micro-Coalescer MS1250D, and larger filters have a built-in particulate element.
  11. Designed for Low Clearance -only 4" (101.6mm) is needed to remove bowl and replace element.

Stainless Steel Housing

Available in 3/4"(19.05mm) NPT and larger sizes for filtration of corrosive gases and installation in corrosive atmosphere. To order Stainless housing, add 'S' before the filter model number.

-Model SPS150

ASME Filter Specifications

The filter housing shall be constructed of carbon steel, internally coated for rust prevention. The filter housing shall be ASME stamped. The filter shall provide maximum access from top for inspection and easy element replacement. The housing shall include arm swing lift mechanism for easy top removal.
Safety and Convenience- Back-Saver feature allows for safe and easy element change and the Filter Change Monitor gives aa Visual signal when the element needs changing.
Pioneer Filter Elements have sealed caps on both ends to prevent leakage.

  

Specifications and Dimensions
Particulate
Filters		 Coalescing
Filters		 Micro-Coalescing
Filters		 Port Size Dimensions in(mm) Approx. shipping wt.
Model SCFM1/2 Model SCFM1/2 Model SCFM1/2 in (mm) A B C D lb/kg
PS30 30 CS25 25 MS20 20 1/4 (6.35)NPT 7 1/8(180.98) 3 1/8 (79.38) - 9/16 (14.29) 2.5 (1.13)
PS40 40 CS35 35 MS25 25 3/8 (9.52) NPT 7 1/8 (180.98) 3 1/8 (79.38) - 9/16 (14.29) 2.5 (1.13)
PS100 100 CS60 60 MS50 50 1/2 (12.7) NPT 9 5/8 (244.48) 3 1/8 (79.38) - 9/16 (14.29) 3.5 (1.59)
PS150D 150 CS90D 90 MS75D 75 3/4 (19.05) NPT 12 3/4 (323.85) 4 1/2 (114.30) - 15/16 (23.81) 4.5 (2.04)
PS200D 200 CS115D 115 MS100D 100 1 (25.4) NPT 12 3/4 (323.85) 4 1/2 (114.30)   15/16 (23.81) 4.5 (2.04)
PS250D 250 CS155D 155 MS125D 125 1 (25.4) NPT 12 3/4 (323.85 4 1/2 (114.30) - 15/16 (23.81) 6.5 (2.95)
PS425D 425 CS250D 250 MS185D 185 1 1/2 (38.1) NPT 20 5/8 (523.88) 5 7/16 (138.11) - 1 1/4 (1.75) 17 (7.71)
PS550D 550 CS350D 350 MS260D 260 1 1/2 (38.1) NPT 26 1/2 (673.1) 5 7/16 (138.11) - 1 1/4 (31.75) 20 (9.07)
PS750D 750 CS450D 450 MS350D 350 2 1/2 (63.5) NPT 27 3/4 (704.85) 6 7/8 (174.63) - 1 3/4 (44.45) 35 (15.88)
PS1000D 1000 CS600D 600 MS450D 450 2 1/2 (63.5) NPT 33 1/2 (850.9) 6 7/8 (174.63) - 1 3/4 (44.45) 42 (19.05)
PS1300D 1300 CS800D 800 MS600D 600 2 1/2 (63.5) NPT 37 1/2 (952.5) 6 7/8 (174.63) - 1 3/4 (44.45) 47 (21.32)
PS1700D 1700 CS1050D 1050 MS800D 800 3 (76.2) NPT 38 3/8 (974.73) 7 5/8 (193.68) - 2 1/8 (53.98) 58 (26.31)
PS2000D 2000 CS1250D 1250 MS1000D 1000 3 (76.2) NPT 44 1/4 (1123.96) 7 5/8 (193.68) - 2 1/8 (53.98) 70 (31.75)
PS2600D 2600 CS1650D 1650 MS1250D 1250 3 (76.2) FLG 72 (1828.8) 17 5/8 (447.68) 57 (1447.80) 15 (381) 300 (136.08)
PS3500D 3500 CS2100D 2100 MS1600D 1600 4 (101.6) FLG 72 (1828.8) 21 3/4 (552.45) 57 (1447.80) 15 (381) 450 (204.12)
PS5200D 5200 CS3100D 3100 MS2500D 2500 6 (152.4) FLG 85 (2159) 20 7/8 (530.23) 68 (1727.2) 15 (381) 500 (226.80)
PS7800D 7800 CS5000D 5000 MS3750D 3750 6 (152.4) FLG 78 (1981.20) 23 7/8 (606.43) 62 1/4 (1581.15) 18 (457.2) 650 (294.84)
PS10400D 10400 CS6600D 6600 MS5000D 5000 8 (233.2) FLG 98 (2489.20) 24 (609.60) 72 1/8 (1831.98) 25 (635) 1050 (476.28)
PS18000D 18000 CS11500D 11500 MS8600D 8600 10 (254) FLG 120 (3048) 24 (609.60) 86 1/2 (2197.1) 33 (838.2) 1250 (567)
PS28600D 28600 CS18000D 18000 MS13500D 13500 12 (304.8) FLG 123 (3124.2) 41 (1041.40) 94 (2387.6) 35 (889) 1550 (703.08)
PS3600D 36000 CS22000D 22000 MS16500D 16500 16 (406.4) FLG 138 (3505.2) 47 (1193.80) 97 (2463.8) 38 (965.2) 2000 (907.20)
Stainless Steel Housing1/2
SPS150 150 SCS90 90 SMS75 75 3/4 (19.05) NPT 14 (355.60 4 1/2 (114.30) - 15/16 (23.81) 20 (9.07)
SPS200 200 SCS115 115 SMS100 100 3/4 (19.05) NPT 14 (355.60) 4 1/2 (114.30) - 15/16 (23.81) 22 (9.98)
SPS250 250 SCS155 155 SMS125 125 1 (25.4) NPT 24 (609.60 4 1/2 (114.30) - 15/16 (23.81) 30 (13.61)
High Pressure Filters 3/4
HPS1600 1600 - - HMS800 800 1/2 (12.7) NPT 8 (203.20) 5 3/4 (146.05) - 1 1/4 (31.75) 10 (4.54)
HPS4000 4000 - - HMS2000 2000 1 (25.4) NPT 14 (355.6) 4 3/4 (120.65) - 1 3/4 (44.45) 25 (11.34)
HPS12000 12000 - - HMS6000 6000 1 1/2 (38.1) NPT 21 (533.40) 6 3/4 (171.45) - 1 7/8 (47.63) 60 (27.22)

Notes:

  1. @100 PSIG (6.9 Bar G)
  2. @ 225°F (107°C)
  3. @3000 PSIG (206.7 Bar G)
  4. @ 350°F (177°C)
  5. Models with 3" (76.2 mm) FLG to 16" (406.4 mm) FLG are 'F' type. All others are 'T' type.
  6. Filters come with initial element(s).
  7. 'D' indicates differential pressure gauge.

Standard Maximum Pressures:

300 PSIG (21 Bar G), 'T' type standard filters
225 PSIG (15.5 Bar G) 'F' type standard filters
300 PSIG (21 Bar G), stainless steel filters
5000 PSIG (345 Bar G), high pressure filters 

 

÷Pioneer Air Systems, Inc.÷

÷210 Flatfork Rd. ÷Wartburg, TN 37887÷Tel: 800-264-1AIR÷Fax: 423-346-3865 ÷ sales@pioneerair.com ÷

Copyright (c) 2004 - Pioneer Air Systems, Pioneer Engineering. All rights reserved.
Information in this document is subject to change without notice.